Manufacturers & Exporters of - Ink Jet Coding, Batch Printing, Labeling & Packaging Systems

 

 << Please Visit here

    

OUR PRODUCTS

 

 

 

 

HOT FOIL CODER (MOTORIZED/PNEUMATIC) - MODEL HFC

 

AIMS compact Motorized Hot – Foil coder for Semi-automatic / Manual Table – Top registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. Rs., Logos, etc. on labels, pouches, cartons, boxes, etc. or for Online registered printing on any intermittent FFS (Form Fill Seal), Oil / Milk Pouch Packing machine, etc. Model HFC-30-T.

 

 

 

 

 

 

 

For the tabletop system, the coder is mounted on a stand and the item to be printed is placed manually and either a foot switch is pressed or a timer activates to code semi-automatically.

 

 

 

 

 

For the on-line system, the print head is mounted on the machine and coding is done whenever the parent machine stops for sealing. It is electronically synchronized with the packaging machine to give registered coding at exact location. 

 

 

 

 

For the manual system, the item to be printed is placed one at a time below the print head on the table & gets printed whenever the handle is pressed manually

INTRODUCTION:

 

These coders are ideal for Semi-Automatic Coding. As soon as the product is put on the platform, coding is done automatically.

 

The 3-line message to be printed is easily composed by pushing the Brass Stereos into the grooves & tightening them. The inking is in the form of Foil ribbon, which passes below the stereos & is advanced automatically after each print. The brass stereos are heated to a temperature of around 150 deg. C & hit the film onto the substrate thus transferring the print with embossing.

 

These are portable, compact and easy to install units. Simply plug the system into any electrical outlet of 230 VAC at your site to start printing.

 

FEATURES:

 

*   DC motor based very compact, lightweight and portable design.

 

*   Online model to be used as a replacement for Electro-Pneumatic

     coders (does not require compressor) for Packaging Machine

     mounting.

 

*   Very low cost machine with low operating and inventory costs. Uses

     metal stereos and foil ribbon to give very clear & sharp impression

     which is better than pre-printed & has no drying time so no

     smudging.

 

*    In built speed control for automatic timed operation (settable) or

     can be connected to any sensor or foot switch for controlled

     operation.

 

*    Imported motor and accessories provide reliability & long life.

 

 

SPECIFICATIONS :

 

 

 

VARIATIONS / DIFFERENT MODELS:

 

Model HFC - 30 - T [] for stand alone Table Top Coder.

Model HFC - 30 - O  []for direct mounting on Packaging Coder.

Model HFC - 30 - M for Manual Table Top Coder.

Model HFC - 30 - []M for Motor driven Coder.

Model HFC - 30 - []P for Pneumatic Cylinder driven Coder.

 

   

ADVANCED INDUSTRIAL MICRO SYSTEMS All rights reserved.